Đầu kim loại cho phát hiện đường dài có thể chịu được môi trường khắc nghiệt nơi mà phôi có thể chà xát chống lại cảm biến.
Phát hiện đường dài * 1 tương đương hoặc lớn hơn cảm biến tiệm cận với đầu Resin
Đầu kim loại cho phát hiện đường dài có thể chịu được môi trường khắc nghiệt nơi mà phôi có thể chà xát chống lại cảm biến
Phát hiện đường dài * 1 tương đương hoặc lớn hơn cảm biến tiệm cận với đầu Resin
Cài đặt có thể ở khoảng cách tương tự như các Cảm biến Khoảng cách với
Các Đầu Nhựa Nhựa Các đầu kim loại của E2EF có cùng khoảng cách với kích thước giống như các Cảm biến Khoảng cách E2E với Các Đầu Nhựa.
Điều này cho phép bạn sử dụng Cảm biến tiệm cận có thể chịu được ma sát với phôi mà không có thay đổi lớn đối với khung lắp.
* 1. Khoảng cách cảm nhận thực tế sẽ thay đổi theo kích thước hoặc vật chất của vật.
Để biết chi tiết, xem Tài liệu Kỹ thuật.
Hơn 20 lần * 2 độ bền của các cảm biến tiệm cận với đầu nhựa.
[Chiều dày đầu 0.4 mm * 3]
Đầu kim loại dày chống lại ma sát với các phôi
Đầu kim loại có đường kính 0,4 mm 3 hầu như không bị mài mòn do ma sát với phôi hoặc làm sạch bằng bàn chải bằng kim loại.
Điều này giúp ngăn chặn thiết bị xuống do thất bại cảm biến và làm giảm tần suất thay thế.
* 2. Thử nghiệm bàn chải bằng thép không gỉ với mô hình M12.
* 3. Đối với mô hình M12.
last update: October 04, 2012
Size | M8 | M12 | |||
Shielded | Shielded | ||||
Exterior | Completely | Fluororesin | Completely | Fluororesin | |
Model | E2EF-X2D1 | E2EF-QX2D1 | E2EF-X3D1 | E2EF-QX3D1 | |
Sensing distance | 2mm ± 10% | 3mm ± 10% | |||
Set distance | 0 to 1.4 mm | 0 to 2.1mm | |||
Differential travel | 15% max. of sensing distance | ||||
Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to | ||||
Standard sensing object | Iron, 12 × 12 × 1 mm | Iron, 12 × 12 × 1 mm | |||
Response frequency *1 | 200Hz | 80Hz | |||
Power supply voltage | 10 to 30 VDC, ripple (p-p): 10% max. | ||||
Leakage current | 0.8 mA max. | ||||
Output configuration | With polarity | ||||
Control | Switching capacity | 3 to 100 mA | |||
Residual voltage | 3 V max.(Load current: 100 mA max., Cable length: 2 m) | ||||
Indicators | Operation indicator (red LED), Setting indicator (green LED) | ||||
Operation mode | NO (normally open) | ||||
Protection circuits | Surge suppressor, Load short-circuit protection | ||||
Ambient temperature range | Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ± 20% max. of sensing distance at 23 °C in the temperature range of − 10 to 70 °C. | ||||
Voltage influence | ± 1% max. of sensing distance at rated voltage in the rated voltage ± 15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z | ||||
Shock resistance | Destruction: 500 m/s2 | Destruction: 1,000 m/s2 10 times each | |||
Degree of protection | IEC 60529 IP67 | ||||
Connection method | Unmarked: Pre-wired Models (Standard cable length: 2 m) | ||||
Weight | Pre-wired | Approx. 105 g | Approx. 190 g | ||
Pre-wired | Approx. 65 g | Approx. 85 g | |||
Materials | Case | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | |||
Sensing surface | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
(thickness) | 0.2mm | 0.4mm | |||
Clamping nuts | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
Toothed washer | Zinc-plated iron | ||||
Cable | PVC (flame retardant) | ||||
Accessories | Instruction manual | ||||
Size | M18 | M30 | |||
Shielded | Shielded | ||||
Exterior | Completely | Fluororesin | Completely | Fluororesin | |
Model | E2EF-X7D1 | E2EF-QX7D1 | E2EF-X12D1 | E2EF-QX12D1 | |
Sensing distance | 7mm ± 10% | 12mm ± 10% | |||
Set distance | 0 to 4.9mm | 0 to 8.4mm | |||
Differential travel | 15% max. of sensing distance | ||||
Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to | ||||
Standard sensing object | Iron, 30 × 30 × 1 mm | Iron, 54 × 54 × 1 mm | |||
Response frequency *1 | 100Hz | 50Hz | |||
Power supply voltage | 10 to 30 VDC, ripple (p-p): 10% max. | ||||
Leakage current | 0.8 mA max. | ||||
Output configuration | With polarity | ||||
Control | Switching capacity | 3 to 100 mA | |||
Residual voltage | 3 V max.(Load current: 100 mA max., Cable length: 2 m) | ||||
Indicators | Operation indicator (red LED), Setting indicator (green LED) | ||||
Operation mode | NO (normally open) | ||||
Protection circuits | Surge suppressor, Load short-circuit protection | ||||
Ambient temperature range | Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ± 20% max. of sensing distance at 23 °C in the temperature range of − 10 to 70 °C. | ||||
Voltage influence | ± 1% max. of sensing distance at rated voltage in the rated voltage ± 15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z | ||||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||||
Degree of protection | IEC 60529 IP67 | ||||
Connection method | Unmarked: Pre-wired Models (Standard cable length: 2 m) | ||||
Weight | Pre-wired | Approx. 215 g | Approx. 295 g | ||
Pre-wired | Approx. 110 g | Approx. 190 g | |||
Materials | Case | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | |||
Sensing surface | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
(thickness) | 0.4mm | 0.5mm | |||
Clamping nuts | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
Toothed washer | Zinc-plated iron | ||||
Cable | PVC (flame retardant) | ||||
Accessories | Instruction manual |
*1. The response frequency of the DC switching section is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice thestandard sensing object, and a set distance of half the sensing distance
Tên sản phẩm | Cảm biến tiệm cận omron E2EF |
Xuất xứ | - |
Bảo hành | - |
Chi tiết | - |