Cảm biến tiệm cận omron E2E2

Size		M12		M18		M30
Shielding		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Model		E2E2-X3D[]	E2E2-X8MD[]	E2E2-X7D[]	E2E2-X14MD[]	E2E2-X10D[]	E2E2-X20MD[]
Sensing distance		3 mm±10%	8 mm±10%	7 mm±10%	14 mm±10%	10 mm±10%	20 mm±10%
*Set distance 1**		0 to 2.4 mm	0 to 6.4 mm	0 to 5.6 mm	0 to 11.2 mm	0 to 8 mm	0 to 16 mm
Differential travel		10% max. of sensing distance
Sensing object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency *2		1 kHz	800 Hz	500 Hz	400 Hz		100 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current		0.8 mA max.
Control output	Switching capacity	3 to 100 mA
	Residual voltage	3 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		D1 Models: Operation indicator (red) and setting indicator (green) D2 Models: Operation indicator (red)
Operation mode (with sensing object approaching)		D1 Models: NO D2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Surge absorber, Load short-circuit protection
Ambient temperature		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		1,000 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC IP67, in-house standard for oil resistance
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 65 g		Approx. 150 g		Approx. 210 g
Materials	Case	Brass
	Sensing surface	PBT
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction sheet

*1. Use the E2E2 within the range in which the setting indicator (green LED) is ON (except D2 Models).
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.

E2E2-X[]C[] DC 3-Wire Models

Size		M12		M18		M30
Shielding		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Model		E2E2-X2C[]	E2E2-X5MC[]	E2E2-X5C[]	E2E2-X10MC[]	E2E2-X10C[]	E2E2-X18MC[]
Sensing distance		2 mm±10%	5 mm±10%	5 mm±10%	10 mm±10%	10 mm±10%	18 mm±10%
Set distance		0 to 1.6 mm	0 to 4 mm	0 to 4 mm	0 to 8 mm	0 to 8 mm	0 to 14 mm
Differential travel		10% max. of sensing distance
Sensing object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 15 × 15 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency *1		1.5 kHz	400 Hz	600 Hz	200 Hz	400 Hz	100 Hz
Power supply voltage (operating voltage range) *2		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current		13 mA max.
Control output	Load current	NPN open-collector output, 200 mA max. (30 VDC max.)
	Residual voltage	2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicators		Operation indicator (red)
Operation mode (with sensing object approaching)		C1 Models: NO C2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Protection circuits		Reverse polarity protection, Surge absorber, Load short-circuit protection
Ambient temperature		Operating/Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		1,000 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC IP67, in-house standard for oil resistance
Connection method		Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight (packed state)		Approx. 75 g		Approx. 160 g		Approx. 220 g
Materials	Case	Brass
	Sensing surface	PBT
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction sheet

*1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. A full-wave rectification power supply of 24 VDC ±20% (average value) can be used.

E2E2-X[]Y[] AC 2-Wire Models

Size		M12		M18		M30
Shielding		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Model		E2E2-X2Y[]	E2E2-X5MY[]	E2E2-X5Y[]	E2E2-X10MY[]	E2E2-X10Y[]	E2E2-X18MY[]
Sensing distance		2 mm±10%	5 mm±10%	5 mm±10%	10 mm±10%	10 mm±10%	18 mm±10%
Set distance		0 to 1.6 mm	0 to 4 mm	0 to 4 mm	0 to 8 mm	0 to 8 mm	0 to 14 mm
Differential travel		10% max. of sensing distance
Sensing object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.)
Standard sensing object		Iron, 12 × 12 × 1 mm	Iron, 15 × 15 × 1 mm	Iron, 18 × 18 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency		25 Hz
Power supply voltage (operating voltage range) *1		24 to 240 VAC (20 to 264 VAC), 50/60 Hz
Leakage current		1.7 mA max.
Control output	Load current *2	5 to 200 mA		5 to 300 mA
	Residual voltage	Refer to Engineering Data on Data Sheet.
Indicators		Operation indicator (red)
Operation mode (with sensing object approaching)		Y1 Models: NO Y2 Models: NC Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Ambient temperature *1, 2		Operating/Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C, ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		4,000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		1,000 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC IP67, in-house standard for oil resistance
Connection method		Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight (packed state)		Approx. 65 g		Approx. 150 g		Approx. 210 g
Materials	Case	Brass
	Sensing surface	PBT
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction sheet